Erik Andersin

Track 706C/A

by Erik Andersin on 26. September 2013

in Track Bowling

Track_706CA_lowSurface finish: Box
Layout: N/A
PAP: 5 1/4 1/4 up
Speed: 28 kmh
Revrate: 330 rpm
RG: 2.52
Diff: 0.053


Ball review:

I bowled a lot with the 7-series balls from Track and this will be no exception. I choose to drill this with the “Rico Layout”. This layout give me control and versatility. Out of box it was a bit stronger than I expected. Will work for me on many different patterns and if I give it some surface this will be a great choice on fresh oiled lanes.

Track_706CA_lowTrack_706CA_core_lowTRACK706

Track 400A SE

by Erik Andersin on 26. September 2013

in Track Bowling

Track_400A_SE_lowSurface finish: Light 4000 Abralon
Layout: N/A
PAP: 5 1/4 1/4 up
Speed: 28 kmh
Revrate: 330 rpm
RG: 2.58
Diff: 0.055

Ball review:

This ball will turn some heads, really cool looks and great performance. I really like the motion of the ball. Clears the heads pretty easy and a strong back-end motion. Actually it hooked more than I expected. Works best for me on medium patters so far, looking forward to use it on more patterns.

So if you are looking for something that differences from others both in performance and looks this is the ball for you.

Track_400A_SE_lowTrack_400A_SE_Core_lowTrack400ASE

Track 706T

by Erik Andersin on 14. May 2013

in Track Bowling

Track_706TSurface finish: Out of box
Layout: –
PAP: 5 7/8 up
Speed: 28kmh
Revrate: 330 rpm
RG: 2.52
Diff: 0.053

Ball review:

The 706T works just as great I hoped for it to do. I have drilled this layout on balls before to give me a ball to go to when I bowl on tougher patterns and on fresh oiled lanes. Works great when I play the lanes more to the right and straighter lines to the pocket. I need to create roll to make this layout work the best but when it does it´s just unbeatable.

Track_706TTrack_706T_Coretrack_706T

Hmr_Nail-TitaniumSurface finish: Box
Layout: 
PAP: 3 15/16″ over and 1 5/16″ up
Speed: 28 kmh
Revrate: 330 rpm
RG: 2.52
Diff: 0.053

Ball review:

The Nail Titanium offers great performance for you money. I have keept it with the factory finish and it gives me a really agressive backend. Great choice when you need a sharp backend motion when the lanes play deep on medium volume patterns.

I tested it on several different patterns and it really shows it´s potencial when need to cover some boards and some angle is required.

Hit’em hard with the new Hammer Nail Titanium!

Hmr_Nail-TitaniumHmr_NailSmokeFire-Core

nail_titanium

Hmr_ChalkSurface finish: Out of box + light 2000 abralon
Layout: –
PAP: 5 7/8 up
Speed: 28kmh
Revrate: 330 rpm
RG: 2.48
Diff: 0.056

Ball review:

I drilled The Chalk with the pin under the bridge to get a ball motion that gives me control and a predictable reaction. I can keep the ball pretty close to the pocket with this combination. It´s a perfect match to my Hammer Arson Hybrid. I got this ball to work really good on medium patterns with less volume of oil. Great midlane lane roll and as always with Hammer great power in the pocket.

Hmr_Chalk

Hmr_Chalk-Corethechalk

Ebonite Champion

by Erik Andersin on 13. March 2013

in Ebonite

Surface finish: Out of box with light 2000 abralon
Layout: 60 5″ 40 & X-hole
PAP: 5 7/8″ up
Speed: Medium
Revrate: 380 rpm
RG: 360
Diff: 0.055

Ball review:

Ebonite delivers again. The Champion is just a great ball on various conditions. I have bowled with it on some longer patterns where it just worked awsome, but still it worked good on a 39 feet pattern a few days later.

With this layout I get some longhet and a controlable backend motion with alot of hitting power. This was so good that I will drill one more with the pin under my finger holes to get a different reaction. I give ball in my bag from now on!

2013-02-27 18.30.59

Surface finish: Box
Layout: –
PAP: 5 1/4 – 7/8 up.
Speed: 
24 kmh
Revrate:
 
410 rpm
RG: 2.48
Diff: 0.056
Ball review:

This is a ball that I would recommend to all type of bowlers. Backend is really strong but still really controllable.

I have tried this ball on pretty many different patterns, the one with pin above the finger holes work great after a few games when I need to get in and create some angle and the other layout works best when I go more direct to the pocket.

I have drilled 2 different layouts on this ball and both work really great and complement each other perfectly.

Can’t wait to compete with this ball!

Columbia 300 Vow

by Erik Andersin on 9. January 2013

in Columbia 300

Surface finish: Box
Layout: –
PAP: 5 1/4 – 7/8 up.
Speed: 
24 kmh
Revrate:
 
410 rpm
RG: 2.47
Diff: 0.057
Ball review:

I was really looking forward to get my hands on this ball as I saw many players do really good with this ball in the WSOB I Las Vegas. I have drilled it similar to my Columbia 300 Oath that I use a lot. This ball is cleaner thru the heads and gives me a rally smooth and predicable motion down lane. One of the most versatile balls that I have tried lately.

Ebonite Exceed

by Erik Andersin on 9. January 2013

in Ebonite

Surface finish: Box
Layout: –
PAP: 5 1/4 – 7/8 up.
Speed: 
24 kmh
Revrate:
 
410 rpm
RG: 2.49
Diff: 0.046

 

Ball review:

The Exceed is the next release after the Innovate, this has a similar motion as the Innovate but earlier and I use it when there is more oil on the  lanes. I often use this ball out of the gates as I get a  strong and easy to control motion.

It has worked great when there are some friction to work with if you prefer to bowl a bit more inside.


Track 912T

by Erik Andersin on 21. June 2012

in Track Bowling

Surface finish: Box
Layout: –
PAP: 5 1/4 – 7/8 up.
Speed: 
24 kmh
Revrate:
 
410 rpm
RG: 2.50
Diff: 0.046

Ball review:

If you want a ball that hooks you don´t need to look any further. 912T impresses me how much it hook but still have that continuous backend motion.

I find this ball very versatile, it has worked well on the medium to heavy patterns as this ball is made for. But I have found it to perform really good on little drier patterns as it gives so much control.



Copyright © 2011 - Bowltech Danmark A/S - Bowling Ball Reviews